With automated production to the optimum PU foam gasket

Consulting, prototyping, commissioning and contract manufacturing from a single source

Technology, material and component - these three factors must be optimally coordinated for the automated production of PU foam gaskets.
DOPAG and Stassen Industries GmbH advise customers together.

Foam gaskets made of polyurethane (PU) protect components from dirt, dust and moisture. They are applied, for example, to doors and ventilation grilles of switch cabinets, to loudspeakers and housings of control units in cars or as clear encapsulation on LED lights. Production is automated in many industries. However, there are still many companies that glue the foam gaskets in manually. The fact is: the automated application has less room for error compared to the manual application, but the process is demanding.

Technology, material and component must be precisely coordinated in order to optimise the production process. In any case, competent advice and support from experts is advisable here. This is offered jointly by the metering and mixing technology manufacturer DOPAG and the sealing and dispensing technology specialist Stassen Industries. The partnership focuses on advising customers on all aspects of gasketing, potting and adhesive applications in contract manufacturing, the production of prototypes and support in the integration and commissioning of the DOPAG dynamicLine, an automated gasketing system.

The advantages of automated application

PU foam gaskets are produced using the FIPFG process (formed-in-place foam gasket). A fully automated system is suitable for series production with high quantities. It enables easy handling of the components and meets all requirements in terms of process reliability and quality standards. Automated material application offers many advantages over manual application. High economic efficiency and a long service life can be achieved. More and higher quality foam gaskets can be produced in a shorter time. Thanks to the controlled overlap, there are no disadvantageous coupling points as with manual gluing. The start and end points of the foam bead merge into one another.

The dynamicLine from DOPAG was specially developed for gasketing applications. Its dynamic mixing system processes polymer reaction materials precisely and with a consistently high quality. In addition to sealign foams, this also includes adhesives and potting compounds. The material is automatically applied directly to the component using a linear robot. It is also possible to use an industrial robot to bring the component into position under the permanently mounted mixing head and to trace the geometry of the foam bead. The seal then cures at room temperature. The duration depends on various factors, including the material, the mixing ratio, the temperature in the room or the humidity. The control unit can store various metering and traversing programmes. Various parameters can thus be changed flexibly. For example, it is possible to switch between different components or material recipes, or different output rates with different seal widths or heights can be selected.

Combination of material and component decides

Stassen Industries GmbH produces PU foam gaskets at its production site in Remscheid, Germany. All employees are familiar with the DOPAG systems and know all production factors. PU foam gaskets are applied to component groups centrally in the value-added chain, across all industries. Speed, flexibility and reliability are required in production. What counts is experience in how the system works best in combination with the material and components to be processed. Stassen Industries is familiar with the equipment and material of all manufacturers as well as the customer's components and thus offers optimum advice and support. The all-inclusive service ranges from consulting and prototyping to contract manufacturing and the configuration and set-up of the DOPAG system at the customer's site. For example, customers can have PU foam gaskets applied to their components at Stassen Industries GmbH with the dynamicLine and thus gain experience. Erol Tamer (CTO) and Dennis Stassen (CEO) advise customers on gasketing, bonding and potting and can give the customer immediate feedback on what works and what doesn't based on their know-how and on tests in their own showroom. Based on years of expertise, the components are assessed and a solution approach is shown or suggestions for the material and the system configuration are made. The customer also receives support with the automation concept.

Later, the DOPAG system can be integrated into the customer's own production line - with the certainty that the application of the PU foam gaskets is already process-optimised. Together with DOPAG, Stassen Industries accompanies the customer from the very beginning and later also sets up the system on site at the customer's premises. The employees know the components and the process. The system is configured correctly straight away, so errors are avoided. If, for example, there are later peaks in production at the customer's site, Stassen Industries can immediately process subcontracted orders for the customer without much effort. In line with the two-supplier strategy, Stassen Industries GmbH thus provides the customer with a reliable backup solution.

Local value chain

Customers benefit above all from short transport routes and a fast response time when working together. The dynamicLine is manufactured at the DOPAG site in Mannheim, Germany. Through close cooperation, customers benefit from local support, comprehensive know-how and many years of industry experience directly through the experts in Mannheim or through the Stassen Industries site in Remscheid, Germany. Through direct exchange, users can familiarise themselves intensively with the dynamicLine and build up their own expert knowledge.

What are the advantages of PU foam gaskets compared to manually inserted seals?

  • Sealing possible in principle of all industrial components (also 3D) and shapes.

  • PU gaskets can be applied captive automated, they can adhere without additional adhesive tape.

  • Start and end points of the foam bead merge thanks to the controlled overlap programmed by DOPAG, no disadvantageous coupling points

  • No open joints or cuts

  • Parameters such as the width, height and hardness of the seal can be influenced

  • Less possibility of errors compared to manual application

  • High cost-effectiveness: The cost of the gasket is of higher quality and much lower compared to manually applied gaskets.

  • Short cycle times allow for efficient, automated production.

  • Low inventory

  • Sustainable: Compared to punched or cut gaskets, there is almost no waste.

  • Environmentally friendly rinsing of the system with water

  • Adhesive-free at room temperature after around four to 20 minutes, an oven for curing is not necessary

Your partnership with DOPAG

  • One contact for the entire system solution
  • All applications from one provider
  • Implementation of specific requirements and automation
  • Competent support from DOPAG experts
  • A dedicated technical centre for testing and customer training
  • Close collaboration with material manufacturers
  • Decades of experience in metering and mixing technology
  • Global distribution and service in over 40 countries

Your contact

Reference projects

Applications

Choose your applications:
All DOPAG articles at a glance:
  1. Reliable bonding of high-quality packaging Reliable bonding of high-quality packaging

    Bischof+Klein uses the eldomix to bond packaging for the food industry. We were on site.

    More
  2. Stable bonding of rotor blades Stable bonding of rotor blades

    Large quantities of adhesive are required in the manufacture of rotor blades. This is achieved with specially developed metering and mixing systems.

    More
  3. Secure gluing of paintbrushes Secure gluing of paintbrushes

    For the secure bonding of paintbrushes we have customised the metering and mixing system economix.

    More
  4. Planning metering and mixing systems correctly Planning metering and mixing systems correctly

    Precision is crucial when it comes to planning. Which factors are particularly important and how can common design flaws be avoided?

    More
  5. Metering mixing and applying thermally conductive silicone material Metering mixing and applying thermally conductive silicone material

    The vectomix TC metering and mixing system from DOPAG processes thermally conductive materials precisely and cleanly. This application shows the processing of Wacker Semicosil 9672.

    More
  6. Adhesive beading in the electronics industry Adhesive beading in the electronics industry

    Higher quantities in less time - For bonding housings for LED luminaires, DOPAG has configured an automated metering system that meets precisely these requirements.

    More
  7. With automated production to the optimum PU foam gasket With automated production to the optimum PU foam gasket
    Technology, material and component - these three factors must be optimally coordinated for the automated production of PU foam gaskets. DOPAG and Stassen Industries GmbH advise customers together.
    More
  8. FIPFG series production of PU foam gaskets for control cabinets FIPFG series production of PU foam gaskets for control cabinets

    SAE Schaltanlagenbau Erfurt relies on the dynamicLine from DOPAG for the individual production of control cabinets. We have visited them on site.

    More
  9. Dispensing two different types of grease Dispensing two different types of grease

    We configured an automated lubricant dispensing system that optimises production processes in the automotive industry.

    More
  10. Dispensing systems for the production of hydrogen tanks Dispensing systems for the production of hydrogen tanks

    The eldomix dispensing system fills an impregnation bath for the production of hydrogen tanks using the filament winding process.

    More
  11. Dispensing of liquid silicone rubber (LSR) in medical technology, food industry and e-mobility Dispensing of liquid silicone rubber (LSR) in medical technology, food industry and e-mobility

    Particularly strict conditions apply to production in the medical technology and food industries. A special configuration from DOPAG enables the use of the dispensing system in the clean room.

    More
  12. How to switch from manual to machine application How to switch from manual to machine application

    When is it beneficial to switch from manual dispensing to a metering and mixing machine? - We support you to identify all relevant influencing variables.

    More
  13. High cost-effectiveness and a wide range of applications for PU foam gaskets High cost-effectiveness and a wide range of applications for PU foam gaskets

    Learn all about Form-In-Place-Foam Gasketing (FIPFG) and how it’s already begun revolutionizing engineering industries and applications around the world.

    More
  14. Gaskets and electronics potting for wallbox production Gaskets and electronics potting for wallbox production

    PU gaskets and potting compounds protect the sensitive electronics in a wallbox against dust, dirt and moisture. We offer solutions for both applications.

    More
  15. Metering and mixing technology for the production of LNG tankers Metering and mixing technology for the production of LNG tankers

    We offer dispensing systems for a reliable application of adhesives and sealants in the manufacturing of liquefied natural gas (LNG) transport tanks.

    More
  16. Contactless application of grease and oil Contactless application of grease and oil

    The contactless application of lubricants meets all conditions for complex, automated production processes and is now standard in many industries. We present the options.

    More
  17. PU gaskets for recyclable HEPA filters PU gaskets for recyclable HEPA filters

    With the dynamicLine, DOPAG provides an automated and clean application of PU foam gaskets on recyclable HEPA filters from the Swiss manufacturer Tecnofil.

    More
  18. Precise bonding for the world’s first retractable solar roof Precise bonding for the world’s first retractable solar roof

    The Swiss start-up dhp technology constructed the world’s first retractable solar roof. The individual modules are manufactured with dispensing technology from DOPAG.

    More
  19. Gasketing and bonding of control cabinets Gasketing and bonding of control cabinets

    With the dynamicLine, DOPAG offers a system for both applications and thus enables an efficient, automated series production.

    More
  20. Manual application of lubricants Manual application of lubricants

    DOPAG offers special dispensing stations for the manual application of lubricants. With the help of an adapter, components such as O-rings and other seals can be greased or oiled manually. 

    More
  21. Coating self-adhesive labels with silicone Coating self-adhesive labels with silicone

    Self-adhesive labels and stickers are produced with silicone coating via coating systems. We provide the metering system to ensure material feed.

    More
  22. Potting electronics boards Potting electronics boards

    DOPAG provided a metering and mixing system for potting electronics boards for e-bike battery packs. 

    More
  23. Serial production of PU foam gaskets in the automotive industry Serial production of PU foam gaskets in the automotive industry

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  24. Bonding and sealing in aircraft production Bonding and sealing in aircraft production

    The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.

    More
  25. Automated bonding of filters Automated bonding of filters

    For the production of plastic filter elements, DOPAG configured and automated metering and mixing system.

    More
  26. Automated application of sealants Automated application of sealants

    DOPAG provides an individual solution for the application of one-component sealant in the production of cardan shafts for special vehicles.

    More
  27. Series production of PU foam gaskets Series production of PU foam gaskets

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  28. Metering and mixing system for adhesive bonding of automotive components Metering and mixing system for adhesive bonding of automotive components

    DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.

    More
  29. Valves for grease spraying in furniture production Valves for grease spraying in furniture production

    DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.

    More
  30. Efficient handling of components during dispensing sealing foam Efficient handling of components during dispensing sealing foam

    For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.

    More
  31. Honeycomb potting of sandwich panels Honeycomb potting of sandwich panels

    With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircraft, could be filled homogeneously.

    More
  32. Sealant dispensing for truck manufacturer Sealant dispensing for truck manufacturer

    DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.

    More
  33. Valves for the contactless spray application of grease and oil Valves for the contactless spray application of grease and oil
    Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
    More
  34. Precise potting of filters and filter elements Precise potting of filters and filter elements

    Precise potting of filters and filter elements is necessary for high safety and purity. DOPAG supported a global manufacturer with individually configured metering and mixing systems.

    More
  35. Profitable production of components for control cabinets and enclosures Profitable production of components for control cabinets and enclosures
    With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
    More
  36. Metering systems for optimal lubricant dispensing Metering systems for optimal lubricant dispensing

    The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!

    More
  37. Continuous dosing of lubricants, adhesives and sealants Continuous dosing of lubricants, adhesives and sealants

    The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.

    More
  38. Dispensing thermal gap fillers Dispensing thermal gap fillers

    Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.

    More
  39. Automated application of PU gaskets on components Automated application of PU gaskets on components

    Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.

    More
  40. Shot valve for contactless greasing Shot valve for contactless greasing

    DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.

    More
  41. Perfect FIPFG applications Perfect FIPFG applications

    The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.

    More
  42. Individual grease dispensing Individual grease dispensing

    DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.

    More
  43. Dosing systems for liquid 3D printing Dosing systems for liquid 3D printing

    The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.

    More
  44. Automated systems for electronic potting Automated systems for electronic potting

    DOPAG provides automated potting solutions for variuos applications - two practical examples!

    More
  45. Turnkey systems for automated metering and mixing Turnkey systems for automated metering and mixing

    CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.

    More
  46. Automated grease metering Automated grease metering

    DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.

    More
  47. Dosing technology in rotor blade production Dosing technology in rotor blade production

    Metering and mixing systems are necessary in various applications in rotor blade production. DOPAG presents its solutions. 

    More
  48. Individual systems for automated glue dispensing Individual systems for automated glue dispensing

    The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.

    More
  49. Automated production of foam gaskets Automated production of foam gaskets

    With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.

    More
  50. Accurate dosing of grease and oil Accurate dosing of grease and oil

    DOPAG developed a special dosing system for the automated lubrication of gas springs.

    More
  51. Lubrication in the automotive industry Lubrication in the automotive industry

    Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.

    More
Show more