economix: dispensing system for epoxy and other 2K fluids

The go-to system for consistent and economical dispensing

The economix range of systems are compact, solvent free, pneumatically driven piston pump metering and mixing systems. They are used to continuously apply low to medium viscosity multiple component materials such as epoxies, polyurethanes and silicones within a mixing ratio of 100:100 to 100:16. The material can be filled as well as abrasive and is supplied from pressure vessels.

Typical Applications

  • Coating
  • Encapsulating
  • Gluing
  • Sealing

Features and Benefits

  • Compact design
  • Economic solution
  • Variable mixing ratio
  • Variable output rate
  • Continuous flow rate
  • Particularly suitable when
  • small quantities are required
  • Solvent free

Functions

Pressure vessels mounted onto a portable chassis, are used to supply the material into the piston type metering pumps. The pumps are driven by a single air motor. A lever system connects pumps and drive. The pump for the A component is fixed to the lever system and shares the same stroke length as the drive motor, whereas the pump for the B component is movable along the lever system and thus has a variable stroke length which is used for the fine adjustment of the mixing ratio. The economix is fitted with a static mixing system that includes a 2K valve combined with a disposable static mixer. The valve contains an infinitely adjustable “snuffer” effect to avoid dripping after metering has finished. Should mixed material be allowed to cure in the mixer, it can be replaced simply and inexpensively, thus avoiding a time consuming, expensive and environmentally damaging flushing cycle.

Technical specifications

  1. Viscosity range

    100 - 50'000 mPa s

  2. Mixing ratio

    1:1 to 6:1

  3. Flow rate

    up to 2 l/min

  4. Maximum working pressure

    160 bar max.

  5. Maximum air inlet pressure

    6 bar

  6. Pressure vessels

    2 x 12 bis 45 l

  7. Dimensions, L x W x H

    900 x 900 x 1,200 mm

  8. Weight

    approx. 130 kg

Standard

  • Portable chassis
  • Pressure vessels
  • Double acting piston pumps
  • Air motor with lever system
  • Static mixing system
    • 2K valve
    • Disposable static mixer
  • Pneumatic-mechanical control

Optional

  • Static-dynamic mixing systems
  • Pressure vessels in variable sizes with
    • level control
    • agitator
    • Heating
  • Pot life control
  • Material filter
  • Material pressure regulator
  • Start/Stop signal with foot switch
  • Manual handle and trigger start/stop fixed to 2K valve