Transfer pumps
Feed material directly from original containers
Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. DOPAG transfer pumps are double-acting pumps with a fast-switching air motor. It should be noted that the use of transfer pumps is always dependent on the material properties and the container type.
Features
- Low viscosity material feeding via a bung hole
- Flow rate up to 1.0/6.0 litres/minute at 20 double strokes
- Pressure ratio up to 21:1/36:1
- Max. viscosity 80'000 mPas
- Sealing available in various sizes and material finish
Compare several products and request them online!
Technical specifications
| Basis version | 1038602 | 1038703 | 1039539 | 1040143 | 1039586 | FP300 |
|---|---|---|---|---|---|---|
| Version | Standard | Standard | Stainless | Standard | Standard | Standard |
|
Pressure ratio (drive) |
21:1 | 21:1 | 21:1 | 7,6:1 | 7.6:1 | 11:1/23:1/37:1 |
|
Flow rate (at 20 double strokes) l/min |
0.80 | 0.80 | 0.80 | 2.24 | 2.24 | 6.00 |
|
Material viscosity mPa s |
50.000 | 50.000 | 50.000 | 50.000 | 50.000 | 50.000 |
|
Working pressure (max.) bar |
100 (160) | 100 (160) | 100 (160) | 50 (80) | 50 (80) | 250 |
|
Air consumption (at 20 double strokes) l/min |
142 | 142 | 142 | 142 | 142 | 450 / 900 / 1400 |
|
Max. container height mm |
339 | 860 | 860 | 351 | 860 | - |
| Max. container size l | 20 | 200 | 200 | 20 | 200 | - |
|
Total length mm |
953 | 1474 | 1474 | 1000 | 1509 | 1040 |
|
Weight without container |
12,1 | 15,7 | 16,1 | 15,8 | 21,1 | 38/42/46 |