eldomix: machine for epoxy potting, bonding and sealing

A compact, versatile and reliable system for precise dosing of 2K media

The eldomix 100/600 range of systems are compact, solvent free, gear pump driven metering and mixing systems. They are used to apply low to medium viscosity multiple component materials such as epoxies, polyurethanes and silicones. The material is supplied from pressure vessels. Special configurations to process high viscosity media are also available.

Applications

  • Coating
  • Encapsulating
  • Gluing
  • Rapid Prototyping
  • Sealing

Industries

These modern metering systems can be used in any industry where materials need to be applied in a high precision and repeatable way.

  • Automotive
  • Electrical and electronic
  • Renewable energy
  • Aerospace
  • White goods
  • and many more

Features and Benefits

  • Variable mixing ratio
  • Variable output rate
  • Compact bench top machine (eldomix 100)
  • Simple operation
  • Shot dispensing or continuous flow
  • Over/under pressure protection
  • Solvent free

Functions

Pressure vessels are used to supply the material into the three phase asynchronous motor driven gear pumps where they are proportioned at the preselected ratio. Each gear pump is protected against over pressure as standard. Using optional integrated volume counters, the mixing ratio can be permanently controlled in freely configurable tolerances. In addition, the system can be equipped with a permanent air-fuel ratio control.

The eldomix is fitted with a metering computer with touch screen terminal and a static mixing system that includes a 2K valve combined with a disposable static mixer. Should mixed material be allowed to cure in the mixer, it can be replaced simply and inexpensively, thus avoiding a time consuming, expensive and environmentally damaging flushing cycle.

Technical specifications

  eldomix 100 eldomix 600
Flow rate From 2 ml/min, depending on mixing ratio and viscosity From 2 ml/min, depending on mixing ratio and viscosity
Mixing ratio 100:100 to 100:5, by volume 100:100 to 100:5, by volume
Maximum working pressure up to 200 bar, depending on material and discharge rate Up to 200 bar, depending on material and discharge rate
Mixing system Static or static-dynamic mixing system
▪ 2K valve
▪ Disposal static mixer
Static or static dynamic mixing system
▪ 2K valve
▪ Disposal static mixer
Dynamic mixing system
Material supply Bench top version: Pressure vessels 4, 12 or 24 l
Welded frame: Pressure vessels up to 45 l, larger on demand and / or drum pumps
Pressure vessels 12 to 90 l,
larger on demand
and/or drum pumps
Viskosity range 50 to 80,000 mPas, with pressure vessel
max. 150,000 mPas, with barrel pumps*
50 to 80,000 mPas, with pressure vessel
max. 150,000 mPas, with barrel pumps*
Material characteristics Unfilled, filled, abrasive Unfilled, filled, abrasive
Power supply 400/230 VAC 3/N/PE / 50/60 Hz 400/230 VAC 3/N/PE / 50/60 Hz
Maximum air inlet pressure 6 bar 6 bar
Dimensions Bench top version: from approx. 810 x 790 x 1,000 mm
Welded frame: from approx. 1,000 x 1,740 x 1,610 mm
From 1,200 x 1,150 x 1,400 mm
Weight Bench top version: from 200 kg
Welded frame: from 400 kg
From 600 kg
  * higher available on request, depending on rheological properties of material  

eldomix 100

Standard

  • Bench top version
  • 12 l stainless steel pressure vessel
  • Gear pump with over pressure-protection
  • Three phase asynchronous motor
  •  Static mixing system
    • 2K valve
    • disposable static mixer
  • Metering computer with realtime Multitasking Operating System (64 programs be stored as standard, including 32 programs via external selection)
  • 7“ colour touch screen terminal
  • Correction curve for pump efficiency («mapping»)
  • Wear detection of the pump («condition monitoring»)

Optional

  • Welded frame on wheels
  • Modular machine setup
  • Extension arm with balancer
  • Pressure vessel with
    • analog level control
    • agitator
    • automatic refill
    • connection for vacuum pump
  • Material supply through drum pumps
  • Additional wear protection for the gear pumps
  • Controlling or regulation of mixing ratio and
    output rate through volume counters
  • Static-dynamic mixing system
    • with mixer element monitoring
  • Start/stop trigger via handle grip or foot switch
  • Manual or automatic circulation
  • Regeneration position
  • Heating

eldomix 600

Standard

  • Chassis with castors
  • 12 l stainless steel pressure vessel
  • Gear pump with over pressure-protection
  • Three phase asynchronous motor
  •  Static mixing system
    • 2K valve
    • disposable static mixer
  • Metering computer with realtime Multitasking Operating System (64 programs be stored as standard, including 32 programs via external selection)
  • 7“ colour touch screen terminal
  • Correction curve for pump efficiency («mapping»)
  • Wear detection of the pump («condition monitoring»)

Optional

  • Larger mobile chassis. also with integrated retention pond
  • Modular machine setup
  • Extension arm with balancer
  • Pressure vessel with
    • analog level control
    • agitator
    • automatic refill
    • connection for vacuum pump
    • automatic vacuum evacuation
  • Material supply through drum pumps
  • Additional wear protection for the gear pumps
  • Pump drive through servo motors
  • Controlling or regulation of mixing ratio and output rate through volume counters
  • Static-dynamic mixing system
    • with mixer element monitoring
  • Dynamic mixing system
  • Start/stop trigger via handle grip or foot switch
  • Manual or automatic circulation
  • Regeneration position
  • Heating or tempering

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information

Close