Transfer pumps
Feed material directly from original containers
Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. DOPAG transfer pumps are double-acting pumps with a fast-switching air motor. It should be noted that the use of transfer pumps is always dependent on the material properties and the container type.
Features
- Low viscosity material feeding via a bung hole
- Flow rate up to 1.0/6.0 litres/minute at 20 double strokes
- Pressure ratio up to 21:1/36:1
- Max. viscosity 80'000 mPas
- Sealing available in various sizes and material finish
Compare several products and request them online!
Technical specifications
| Basis version | TP20 505.05.30 | TP60 505.05.31 | TP200 505.05.32 | TP200 505.05.82 | FP300 |
|---|---|---|---|---|---|
| Pressure ratio (drive) | 21:1 | 21:1 | 21:1 | 7.6:1 | 11:1/23:1/37:1 |
| Flow rate (at 20 double strokes) l/min | 0.80 | 0.80 | 0.80 | 2.24 | 6.00 |
| Material viscosity mPa s | 50.000 | 50.000 | 50.000 | 50.000 | 50.000 |
| Working pressure (max.) bar | 100 (160) | 100 (160) | 100 (160) | 50 (80) | 250 |
| Air consumption (at 20 double strokes) l/min | 142 | 142 | 142 | 142 | 450 / 900 / 1400 |
| Height retracted mm | 917 | 1150 | 1438 | 1438 | 1040 |
| Pump length mm | 339 | 577 | 860 | 860 | 600 |
| Weight without container kg | 13.2 | 14.9 | 14.9 | 14.9 | 38 / 42 / 46 |
| Maximum container height mm | 339 | 577 | 860 | 860 | - |
| Maximum container size l | 20 | 60 | 200 | 200 | - |