Clean processing and accurate application

Innovative bonding and sealing solutions for glazing

Dispensing system for the application of adhesives and sealants

It is not easy to bring together two different materials. With innovative solutions, we help to ensure that the tasks at hand are mastered with ease. In building planning, valid building regulations and guidelines regarding energy and fire protection standards present architects and design offices with new challenges. This primarily applies to sections of the building fronts such as windows, doors and gates. Such architectural components are the basis for energy efficiency classes and for meeting fire regulations. Therefore, they are already subject to specific provisions during their production. To ensure optimum product quality, absolute process stability must be ensured. This especially applies to the joining of different materials in the production of windows, doors and gates made out of glass.

Applications for windows and building fronts range from structural bonding (high-rise fronts) to the application of the secondary sealant (edge seal). The filling of cartridges (side-by-side or pre-mixed cartridges) is another application. The focus is on the manual application for which DOPAG provides various accessories, apart from its metering and mixing systems.

DOPAG metering and mixing systems are designed to process silicone, polyurethane or polysulfide-based 2-C adhesives and to apply them to the component with high precision. The aspects being relevant for the market success are the accuracy in meeting the demanded mixing ratio and the high flow rate in liters per minute. As additional benefits, conservation of resources and a good waste balance are offered, with low waste disposal costs as the materials are joined not earlier than in the mixing tube. The use and management of chemicals as well have been carefully considered, from clean material container change to tiny material residual quantities.

Das Kleben und Dichten gehört zu einer immer beliebter werdenden Methode, um Bauteile schraubenfrei miteinander zu verbinden. Mit DOPAG Anlagen erfolgen Applikationen zuverlässig und präzise.

  1. eldomix


    Die Anlagen der Baureihe eldomix 100/600 sind spülmittelfreie, kompakt aufgebaute Zahnradpumpen-Dosieranlagen.

  2. variomix


    Die Anlagen der Baureihe variomix sind spülmittelfrei und kompakt aufgebaute, pneumatisch oder hydraulisch betriebene Kolbenpumpen-Dosier- und Mischanlagen.

  3. vectomix


    Vectomix wird für die Verarbeitung von Mehrkomponenten-Medien eingesetzt. Hierzu werden aufgrund der Kompatibilität und Modularität zwei vectodis Kolben-Dosiereinheiten, auch unterschiedlicher Baugröße, verwendet.