Micro-Flow Sensor: real-time flow monitoring
Reduce lost production time and maximise your line's efficiency
The micro-flow sensor can be used with needle metering valves to confi rm that material is being dispensed. It is designed for the detection of very small quantities (0.005 - 3.00 ml). This device is meant purely for material discharge monitoring purposes, not as a means of volumetric measurement.
The micro-flow sensor detects whether material has been dispensed or not, without contact with the material. An induced analogue measurement signal is amplified and forwarded to the electronic controller. The sensor is able to capture up to 120 metering cycles per minute. Should the electronic controller fail to send a signal as a result of no material flow, the master control unit will activate an alarm.
- Continuous detection of material flow
- High process reliability
- Simple refitting to existing metering systems
- Compact sensor design
- Dependable electronics
- Simple operation
- No mechanical adjustment required
- Stainless steel wetted parts
- Adaptable to all DOPAG needle nozzles
|5 to 25 mm³ per cycle with Micro metering valve
|5 to 3.000 mm³ per cycle with Mini metering valve
|and the 419 range of metering valves
|up to 120 metering cycle per minute
|Connector for DOPAG needle nozzle M 12 x 1
|Electronic control supply voltage
|18 to 36 V DC
|Electronic control signal output
|24 V DC, 500 mA max.
|Dimensions, L x B x H
|Micro-flow sensor without needle nozzle, 80 x 63 x 19 mm Electronic control, 115 x 100 x 19 mm