Dispensing technology for composite manufacturing
Advanced systems for interior and exterior aircraft component production
DOPAG has decades of experience in the production of interiors and exteriors in the aerospace industry. In particular, DOPAG offers high-quality solutions for the production of fiber composite components: For the highly complex lightweight materials, DOPAG developed special equipment that ensures precise metering and mixing and meets the needs of increasing automation.
For many years now, the aerospace industry has been a quickly growing market on an international basis. The number of airliners, for instance, that amounts to 15,000 planes today, will more than double by the year 2030. This means the production rates must be increased significantly to be able to meet the strongly growing demand. Well-known manufacturers are working on increasing their production output for their top sellers from values that currently are far below 50 units to more than 60 airplanes per month. So at least two new planes per day are planned to leave the workshop in the near future.
Cost savings in the course of the production and the pursued reduction of the greenhouse effect are additional challenges. This comprises both the optimization of the jet engines and new and especially light materials such as fiber-reinforced composites that currently make up approximately 50 per cent of the materials used. Higher cost efficiency can only be achieved with automated manufacturing processes with systems that can operate at high speed and with excellent reliability and deliver a high-quality result. That means the portion of manual work that currently is still rather high must be automated in the long run.
Intelligent solutions by DOPAG
As the market leader, DOPAG possesses technologies for high-precision mixing and dosing with assured quality for all stated procedures and supplies the largest sub-contractors of the aerospace industry with systems. Based on many years of experience in processing epoxy resins and complex materials such as polysulfides used for sealing aircraft fuel tanks and outer skins, systems have been developed that are used all over the world and that meet the demand for increasing automation. Especially in view of the new trends towards the increased production of composite fiber components, DOPAG offers technically advanced solutions that ensure precise mixing and metering of the materials.
Your contact
Special metering system for the homogeneous, automated filling of honeycomb panels
Honeycomb panels are primarily used in aircraft interiors, such as in toilet walls and side panels, kitchen structures and floor panels. Honeycomb panels, or sandwich panels with a honeycomb core, are first produced for this purpose. To ensure high stability of the honeycomb structure, they are filled with low-density materials. The DOPAG metering system coredis enables the automated filling of honeycomb cores by means of a robot and portal system.
Reference projects
-
Bischof+Klein uses the eldomix to bond packaging for the food industry. We were on site.
-
Large quantities of adhesive are required in the manufacture of rotor blades. This is achieved with specially developed metering and mixing systems.
-
For the secure bonding of paintbrushes we have customised the metering and mixing system economix.
-
Precision is crucial when it comes to planning. Which factors are particularly important and how can common design flaws be avoided?
-
The vectomix TC metering and mixing system from DOPAG processes thermally conductive materials precisely and cleanly. This application shows the processing of Wacker Semicosil 9672.
-
Higher quantities in less time - For bonding housings for LED luminaires, DOPAG has configured an automated metering system that meets precisely these requirements.
-
Technology, material and component - these three factors must be optimally coordinated for the automated production of PU foam gaskets. DOPAG and Stassen Industries GmbH advise customers together.
-
SAE Schaltanlagenbau Erfurt relies on the dynamicLine from DOPAG for the individual production of control cabinets. We have visited them on site.
-
We configured an automated lubricant dispensing system that optimises production processes in the automotive industry.
-
The eldomix dispensing system fills an impregnation bath for the production of hydrogen tanks using the filament winding process.
-
Particularly strict conditions apply to production in the medical technology and food industries. A special configuration from DOPAG enables the use of the dispensing system in the clean room.
-
When is it beneficial to switch from manual dispensing to a metering and mixing machine? - We support you to identify all relevant influencing variables.
-
Learn all about Form-In-Place-Foam Gasketing (FIPFG) and how it’s already begun revolutionizing engineering industries and applications around the world.
-
PU gaskets and potting compounds protect the sensitive electronics in a wallbox against dust, dirt and moisture. We offer solutions for both applications.
-
We offer dispensing systems for a reliable application of adhesives and sealants in the manufacturing of liquefied natural gas (LNG) transport tanks.
-
The contactless application of lubricants meets all conditions for complex, automated production processes and is now standard in many industries. We present the options.
-
With the dynamicLine, DOPAG provides an automated and clean application of PU foam gaskets on recyclable HEPA filters from the Swiss manufacturer Tecnofil.
-
The Swiss start-up dhp technology constructed the world’s first retractable solar roof. The individual modules are manufactured with dispensing technology from DOPAG.
-
With the dynamicLine, DOPAG offers a system for both applications and thus enables an efficient, automated series production.
-
DOPAG offers special dispensing stations for the manual application of lubricants. With the help of an adapter, components such as O-rings and other seals can be greased or oiled manually.
-
Self-adhesive labels and stickers are produced with silicone coating via coating systems. We provide the metering system to ensure material feed.
-
DOPAG provided a metering and mixing system for potting electronics boards for e-bike battery packs.
-
With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.
-
The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.
-
For the production of plastic filter elements, DOPAG configured and automated metering and mixing system.
-
DOPAG provides an individual solution for the application of one-component sealant in the production of cardan shafts for special vehicles.
More -
With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.
-
DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.
-
DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.
-
For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.
-
With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircraft, could be filled homogeneously.
-
DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.
-
Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
-
Precise potting of filters and filter elements is necessary for high safety and purity. DOPAG supported a global manufacturer with individually configured metering and mixing systems.
-
With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
-
The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!
-
The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.
-
Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.
-
Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.
-
DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.
-
The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.
-
DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.
-
The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.
-
DOPAG provides automated potting solutions for variuos applications - two practical examples!
-
CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.
-
DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.
-
Metering and mixing systems are necessary in various applications in rotor blade production. DOPAG presents its solutions.
-
The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.
-
With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.
-
DOPAG developed a special dosing system for the automated lubrication of gas springs.
-
Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.
Composite processing: Honeycomb Potting / Core Filling in aerospace industry
Bonding and sealing is becoming an increasingly popular method of joining components without screws. With DOPAG systems, applications can be realized reliable and precise.
DOPAG offers reliable solutions for the manufacture of fibre composite components, for example RTM, Filament Winding, Infusion, Pultrusion, etc.