The viscomix metering system is particularly suitable for sealing and bonding applications in the transport and insulated glass industries that require a continuous material supply.

The VISCO-MIX H200 is a hydraulically powered two component, high quality metering and mixing system suitable for processing medium to high viscosity materials at an variable mixing ratio. The material supply with the base component is pumped directly from standard 200 litre size drums. The hardener is fed directly from 30 litre size drums or by pressure vessel.

The VISCO-MIX P80 is a pneumatically driven, variable mixing ratio, two component metering and mixing system for processing medium to high viscosity media. Both the base and the hardener materials are supplied by 80 litre size drum pumps fed directly from containers of between 20 litres and 80 litres capacity. The “B” component can also be fed by a pressure feed container.

Function viscomix H200

Both the base and hardener materials remain separate until they reach the static mixing system, where they are homogeneously mixed and dispensed through the dispensing gun. After use, the static special mixing system is purged with base material to avoid material curing within the mixer system.

Function viscomix P80

The materials are fed by pumps from their original drums and kept separate until they enter the mixing block, following which they are mixed homogeneously by the static mixing system. After use, the plastic static mixer is disposed of and replaced, avoiding the use of flushing agents.

Features and benefits

  • Compact size
  • Variable mixing ratio
  • No solvent flushing
  • High contact pressure with high viscous media
  • Static mixer with removable mixing elements for viscomix H200 and plastic mixer for viscomix P80

Technical Specifications

  viscomix H200 viscomix P80
Viscosity range up to 2.5 Mio. mPa s up to 2.5 Mio. mPa s
Metering ratio 5:1 to 20:1 (volume) 100:5 to 100:20 (volume)
Flow rate up to 2.5 l/min per 20 cycles, depending on the viscosity up to 0.6 l/min per 20 cycles, depending on the viscosity
Air inlet pressure supply 6 bar 6 bar
Air inlet connection 1/2” BSP 1/2” BSP
Air consumption 300 l/min 300 l/min
Drum size A component 200 l, B component 30 l/pressure vessel A component 20 to 80 l, B component 20 to 80 l/pressure tank
Dimensions (L x W x H) approx. 1800 x 1200 x 2470 mm 900 x 900 x 1400 mm
Weight approx. 700 kg approx. 150 kg, depending on theapprox. 150 kg, depending on the configuration

viscomix H200


  • Chassis with casters
  • Hydraulic drum pump P200 H with pneumatic twin post ram for base component
  • Pneumatic drum pump P30 with pneumatic twin post ram for hardener component
  • Lever system for mixing ratio adjustment
  • Hydraulic power pack
  • PLC control unit
  • Pressure control with digital membrane pressure manometers
  • Static special mixing system
  • Dispensing gun


  • Cantilever arm for fluid hoses
  • Reinforced pump elevators for highly viscous
  • Pressure feed container for hardener component
  • Individual adaptation

viscomix P80


  • Chassis with casters
  • Drum pump P80 for "A” and "B” components
  • Mixing ratio setting by mechanical lever system
  • Plastic mixer


  • Pressure control by contact manometers
  • High pressure pump rams for high viscosity material
  • Pressure feed container for “B” component

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information