Metering technology for the production of household appliances
Solutions for all production steps: bonding, sealing, greasing, potting and gasketing
The production of modern household appliances for the global market requires stable, automated production processes. This is essential for long-term success in the competitive international market.
Metering and mixing technology is a key part of almost all production steps in the household appliance industry. The various components are bonded, sealed, greased or potted during the production process. DOPAG offers the customised metering and mixing systems required for every type of application: bonding, sealing, greasing, oiling, potting and gasketing.
For sealing, DOPAG offers metering systems for the dynamic mixing and application of sealing foams as well as metering and mixing systems for the application of adhesives. Various systems fitted with piston or gear pumps are available for the metering, mixing and application of sealants and adhesives. For greasing and oiling, a modular range of metering components, valves and pumps enables individual systems to be set up, which can be integrated into automated production lines.
We adapt and customise all metering and mixing systems to your specific requirements. Our engineers and technicians support you throughout the design and execution of your production processes.
Your contact
Washing machines
- Greasing: dampers, drum bearings, door seals and hinges, electrical switches
- Gasketing: filling the frame, control housing, water pump
- Bonding and sealing: door seal, display, top panel, worktop
- Potting: Heat condensers for tumble dryers
Dishwashers
- Greasing: pumps and seals, plastic sliding elements, door hinges and seals.
- Gasketing: tab box, frame, rear panel
- Bonding and sealing: display, panels, sound and vibration damping, rear panel
- Potting: control electronics
Refrigerators and freezers
- Greasing: Sintered bearing soaking of electric motor, door hinges, compressors, pistons
- Gasketing: frame seal, noise insulation elements
- Bonding and sealing: housing, display, glass front, insulating glass doors, noise insulation
- Potting: control electronics
Ceramic hobs and ovens
- Greasing: air circulation fan, sintered bearing soaking, gas valves, electrical switches, door opening mechanisms
- Gasketing: ceramic hobs, hot plates, oven door
- Bonding and sealing: display, panels, glazing
- Potting: control electronics
Household appliances
Greasing, gasketing, bonding, sealing and potting for:
- Coffee machines, toasters
- Kneading devices, mixers
- Microwaves
- Vacuum cleaners
- Air conditioning systems
- Steam irons
Rinsing
- Gasketing: foamed seal on installation side
We offer metering and mixing technology for these applications:
Gasketing
Gasketing
Provides external sealing of housing and protects electronics from dust and moisture.
Bonding and sealing
Bonding and sealing
Components are bonded and sealed against dust and moisture.
Potting
Potting
Electrical and electronic components are potted with epoxy resin, for example, and thus protected against dust, moisture, corrosion and shock, as well as providing sight protection and protection against replication.
Greasing and oiling
Greasing and oiling
Moving parts or seals are greased, which ensures a long functional life.
Reference projects
-
Bischof+Klein uses the eldomix to bond packaging for the food industry. We were on site.
-
Large quantities of adhesive are required in the manufacture of rotor blades. This is achieved with specially developed metering and mixing systems.
-
For the secure bonding of paintbrushes we have customised the metering and mixing system economix.
-
Precision is crucial when it comes to planning. Which factors are particularly important and how can common design flaws be avoided?
-
The vectomix TC metering and mixing system from DOPAG processes thermally conductive materials precisely and cleanly. This application shows the processing of Wacker Semicosil 9672.
-
Higher quantities in less time - For bonding housings for LED luminaires, DOPAG has configured an automated metering system that meets precisely these requirements.
-
Technology, material and component - these three factors must be optimally coordinated for the automated production of PU foam gaskets. DOPAG and Stassen Industries GmbH advise customers together.
-
SAE Schaltanlagenbau Erfurt relies on the dynamicLine from DOPAG for the individual production of control cabinets. We have visited them on site.
-
We configured an automated lubricant dispensing system that optimises production processes in the automotive industry.
-
The eldomix dispensing system fills an impregnation bath for the production of hydrogen tanks using the filament winding process.
-
Particularly strict conditions apply to production in the medical technology and food industries. A special configuration from DOPAG enables the use of the dispensing system in the clean room.
-
When is it beneficial to switch from manual dispensing to a metering and mixing machine? - We support you to identify all relevant influencing variables.
-
Learn all about Form-In-Place-Foam Gasketing (FIPFG) and how it’s already begun revolutionizing engineering industries and applications around the world.
-
PU gaskets and potting compounds protect the sensitive electronics in a wallbox against dust, dirt and moisture. We offer solutions for both applications.
-
We offer dispensing systems for a reliable application of adhesives and sealants in the manufacturing of liquefied natural gas (LNG) transport tanks.
-
The contactless application of lubricants meets all conditions for complex, automated production processes and is now standard in many industries. We present the options.
-
With the dynamicLine, DOPAG provides an automated and clean application of PU foam gaskets on recyclable HEPA filters from the Swiss manufacturer Tecnofil.
-
The Swiss start-up dhp technology constructed the world’s first retractable solar roof. The individual modules are manufactured with dispensing technology from DOPAG.
-
With the dynamicLine, DOPAG offers a system for both applications and thus enables an efficient, automated series production.
-
DOPAG offers special dispensing stations for the manual application of lubricants. With the help of an adapter, components such as O-rings and other seals can be greased or oiled manually.
-
Self-adhesive labels and stickers are produced with silicone coating via coating systems. We provide the metering system to ensure material feed.
-
DOPAG provided a metering and mixing system for potting electronics boards for e-bike battery packs.
-
With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.
-
The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.
-
For the production of plastic filter elements, DOPAG configured and automated metering and mixing system.
-
DOPAG provides an individual solution for the application of one-component sealant in the production of cardan shafts for special vehicles.
-
With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.
-
DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.
-
DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.
-
For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.
-
With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircraft, could be filled homogeneously.
-
DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.
-
Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
-
Precise potting of filters and filter elements is necessary for high safety and purity. DOPAG supported a global manufacturer with individually configured metering and mixing systems.
-
With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
-
The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!
-
The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.
-
Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.
-
Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.
-
DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.
-
The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.
-
DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.
-
The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.
-
DOPAG provides automated potting solutions for variuos applications - two practical examples!
-
CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.
-
DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.
-
Metering and mixing systems are necessary in various applications in rotor blade production. DOPAG presents its solutions.
-
The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.
-
With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.
-
DOPAG developed a special dosing system for the automated lubrication of gas springs.
-
Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.
Custom-built dispensing systems to automated bonding applications
Automated component handling as well as integration of pre-treatment and post-treatment
We cover every step involved in the automated application of adhesives:
- Pre-treatment: plasma, corona flame, brushes
- Adhesive application for one, two and multi-component adhesives and sealants
- Different application methods: bead, spray, thin layer
- Manual, semi-automated or fully automated systems depending on level of automation
- Joining techniques: hot stamping, clinching, screwing
- Hardening systems: infrared, ultraviolet (UV), medium-frequency technology, continuous furnaces
- Various robot systems
- Quality assurance: volumetric measuring systems, verification of adhesive application (position and quality), component control and measuring
- Process data archiving, process visualization: data carriers (USB, flashcard), network, SCADA systems
Bonding and sealing is becoming an increasingly popular method of joining components without screws. With DOPAG systems, applications can be realized reliable and precise.
With dynamicLine and the new dynamic mixing head, DOPAG offers an efficient solution for all applications relating to gasketing.
-
Dynamic mixing head
Dynamic mixing headThe dynamic mixing head with its new valve technology has been designed for mixing of low to high-viscosity polymeric reaction substances for foaming, bonding, sealing, and potting.
In Potting, resins such as silicones, polyurethanes or epoxy resins are used in liquid form. For the production process, DOPAG offers various metering and mixing systems.
Whether it be racks, headrests, door locks or just the wheel bearings in automobiles, all must be greased. DOPAG provides the optimum metering system for each of these applications.
-
Chamber Metering Valves
Chamber Metering ValvesChamber metering valves are used for dot application. They offer a wide range of shot sizes and feature a drip-free mechanism.
-
Diaphragm Dispensing Valves
Diaphragm Dispensing ValvesDiaphragm dispensing valves are used for continuous application of 1K media. They can process reactive, abrasive and chemically aggressive material.
-
Gear Flow Meter
Gear Flow MeterDeveloped specifically for use in DOPAG metering systems, the flow meter is used for measuring the exact material flow rate at any given moment.
-
Handheld Dispensing Valves
Handheld Dispensing ValvesHandheld dispensing valves from DOPAG enable a clean manual application of greases and oils.
-
Handheld Metering Valves
Handheld Metering ValvesDOPAG offers a variety of handheld metering valves for the manual dispensing of lubricants.
-
High-Speed Valves
High-Speed ValvesHigh-speed valves are used for contactless lubrication in automated processes. They are excellent at greasing hard-to-reach spaces in a clean and precise manner.
-
Light barrier
Light barrierThe light barrier is used with shot and high-speed valves to monitor the number of discharged shots.
-
Material pressure regulator
Material pressure regulatorThe material pressure regulator ensures a pulsation-free dispensing of grease, oil and silicone.
-
Needle Dispensing Valves
Needle Dispensing ValvesNeedle dispensing valves offer high flexibility and are ideal for continuous applications of low to high viscosity media.
-
Needle Metering Valves
Needle Metering ValvesNeedle metering valves are ideal for applications requiring the application of small quantities with higher reproducibility and short cycle times.
-
Pressure sensors
Pressure sensorsPressure sensors for the monitoring of material pressure in complex dispensing processes using shot or spray valves.
-
Pressure Tanks
Pressure TanksFor effortless and clean feeding of low viscosity media such as paint, oils and preservatives.
-
Pumps for lubricants
Pumps for lubricantsThe lubriLine pump range offers products specially designed for the processing of grease and oil.
-
Rotary Applicator
Rotary ApplicatorThe rotary applicator was specially developed for 360° greasing or oiling of holes.
-
Shot Valves
Shot ValvesDOPAG shot valves are designed for an accurate and contactless application of lubricants in automated production processes.
-
Spray Guns
Spray GunsThe spray gun is our solution to manual full-surface application of greases and oils.
-
Spray Valves
Spray ValvesThe DOPAG spray valve has been specially designed for the application of grease and oil over the entire surface.
-
Stroke detection
Stroke detectionThe stroke detection device reliably monitors the correct activity in various dispensing and metering valve types.
-
Transfer Pumps
Transfer PumpsTransfer pumps are used for material feeding directly from the original containers.
DOPAG offers specially developed dosing systems for dosing thermally conductive materials such as gap fillers, adhesives and sealants or potting compounds.
-
vectomix TC
vectomix TCThe dispensing system vectomix TC is especially designed for metering and mixing thermally conductive materials.