Dispensing systems for bonding rotor blades

Shorten production times and optimise costs with the right system technology

Over the decades to come, we will see a continuous increase in the proportion of wind power in the global energy mix. The goal is for wind farms to supply electricity at a price lower than that of fossil energy. As a result, the manufacturers of rotor blades and of dispensing and mixing systems for adhesives will have a number of challenges to overcome in the future.

The key considerations when manufacturing rotor blades for wind turbines are to shorten the production time while reducing production costs. At the same time, wind farm operators require a warran ty on the blades lasting for more than 20 years. In order to fulfil all of these require ments, the different disciplines involved need to pool their expertise and work to gether efficiently. The dispensing, mixing and application of adhesives in particular play an important role (Figure 1).

Increasing amounts of adhesives

In the case of rotor blades that are more than 100 meters in length, up to 1200 kilo grams of adhesive are needed to bond the two halves of the blades together. Both the length of the blades and the amount of adhesive required are likely to increase in the future. The open time of the adhesive is generally around 45 minutes at 25 °C. Regardless of the blade size, the bonding process must be completed within this time. The adhesive is measured using highresolution volume counter units with a closedloop regulation system for each of the adhesive components. Sensors can also be integrated to monitor the application temperature within the required tolerances.

To meet the requirements imposed by longer rotor blades and increasing amounts of adhesives, Dopag has devel oped very large dispensing and mixing machines with 400liter buffer tanks for each component. They have mobile refilling stations to reduce the amount of space needed for the dispensing system, which is an important consideration in the production facilities of many businesses. With the help of these systems, users can make effective use of 600 liters or around 750 kilograms of the adhesive stored in the machine. As a result, no more than two dispensing and mixing machines are needed, even though the schedule for the bonding process is tight. The refilling stations enable operators to use the remaining materials for the next bonding process and to keep the maximum amount of materials available between two applications.

Processing three-component adhesives

Certain manufacturing processes require three-component adhesives. Machines are available on the market which are specifically designed for processing fast and slowcuring adhesives. These machines enable the manufacturers of rotor blades to choose and apply the curing agent that best meets their individual requirements.


Where smaller sections of the rotor blades have to be bonded toward the end of the adhesive application, a fast-curing adhesive speeds up the process. In the case of larger components, such as the main mold (Figure 2), a slow-curing adhesive allows for a careful, thorough bonding process.

The option of choosing different adhesives not only improves the overall efficiency of the bonding process, but also offers a range of opportunities for adapting the procedure. As a result, users can fulfill the varying requirements of the different components of the rotor blades.

Accelerating the processes

Because of the properties of the materials, accelerating the bonding process represents a major challenge. The curing of materials is a continuous process and reliable adhesion depends on the open time of the mixed adhesive, which is a crucial aspect of its pot life. As already mentioned, the application cycle must be completed within 45 minutes, regardless of the blade size. Because of the increasing length of rotor blades, the bonding process needs to be speeded up.

The most recently developed high-performance dispensing pumps with highly accurate process settings allow adhesive to be dispensed at a speed of over 30 kilograms per minute. Furthermore, machines with variable flow rates and additional material buffers are available which do not need to be refilled during the process. With the help of this new technology, adhesives can be dispensed, mixed and applied within the specified time window.


Application with different bead profiles

Different bead profiles are needed when the adhesive is applied to the various sections of the rotor blade: the main mold, leading edge and trailing edge. To ensure that the application process meets the varying requirements of the bonding gap, the nozzle often has to be changed – up to nine times for each rotor blade. This is highly time-consuming and involves a great deal of work. It makes up a significant part of the bonding process and may prevent rotor blades from being increased in size any further. In addition, the bonding points sometimes require manual reworking (shape, air bubbles etc.), which results in a considerable increase in the amount of work in the overall process.

The Fraunhofer Institute for Wind Energy Systems IWES has developed a variable nozzle for the application of adhesives that can apply different profiles in one step. The nozzle can automatically adjust the profile of the adhesive bead applied to different sections of the rotor blade, which results in a significant reduction in the time needed. The use of sensors allows this process to be partially or fully automated and the quantity of material used from the start of the bonding process can be accurately measured (Figures 4 and 5).

This technical development makes it possible to apply only the specified amount of adhesive to each section with the correct bead profile, which guarantees the highest possible quality and keeps waste to a minimum. Rotor blades bonded in this way are also lighter in weight. Dopag has incorporated the variable adhesive application nozzle into its Gluemix metering and mixing system (Figure 3).


Consistent mixing ratio

Manufacturers provide a warranty on their rotor blades for a period of more than 20 years. One important factor in meeting this commitment is the permanent bond between the two halves of the blade. This can only be guaranteed if the specified mixing ratio for the material components remains consistent during the application of the adhesive. The main adhesive used in the wind power industry is a two-component epoxy resin. The tolerances for the mixing ratio are very tight. The ratio must remain within the range of ±2 parts hardener to 100 parts resin. The consistency of the mixing ratio is guaranteed by high-precision volume counters which are used to control and operate the metering pumps for each component independently as part of a closed loop regulation system.

Dopag uses spindle flow meters to ensure that the pressure drop in the volume counter is kept to a minimum when compared with other available solutions. This functionality allows for end-to-end monitoring and control of the mixing ratios.

In addition, the systems have an automatic pre-calibration mechanism that relies on weighing systems. This results in a significant increase in the reliability of the process, because the ratios can be maintained accurately and consistently. Dopag has integrated these technologies into its Gluemix system.

Figure 5: The variable adhesive application nozzle can apply adhesive beads with different profiles.

Online monitoring and predictive maintenance

The continuous convergence of the systems and processes allows the different elements of the production chain to be connected with one another. This ongoing process (Industry 4.0) includes the integration of data analyses and intelligent technologies with the aim of creating a more efficient and reliable production environment. The increasing connectivity also enables seamless communication between the systems in the mixing process for adhesives for rotor blades. This increases the efficiency of the process and makes it possible to respond to changes in real time.

The Dopag Life Cycle Logger (LCL) allows for online monitoring and predictive maintenance of the system which represents a significant advance in the bonding process. In the past, it was rarely possible to carry out reliable analyses of historical operating data and draw conclusions about maintenance intervals and the service life of components. The new module gives machine operators and service staff a detailed insight into all the process parameters and usage profiles of the metering components. These include material quantities and pressures, temperature and acceleration data, test bench results concerning efficiency and other operating data. As a result, users can respond immediately to anomalies and ensure a high level of process reliability. This also brings benefits for predictive maintenance. By comparing the data, operators can identify at an early stage any potentially critical areas of wear and gradually emerging faults.

In the context of overall equipment effectiveness (OEE) (Figure 6), all the key figures concerning availability, performance and quality can be accurately documented. OEE is a globally recognized standard for evaluating the productivity of industrial plants and plays a central role in improving operational efficiency. The data provided by the Life Cycle Logger forms the basis for the strategic planning and monitoring of the real-time productivity of dispensing machines and it can be seamlessly integrated into modern lean management systems.

Government subsidies

In many countries, the expansion of the domestic wind energy sector is strategically important for the energy mix. As a result, governments are actively supporting and financing a wide range of research projects. The aim is to improve the processes in the wind energy industry, in particular with regard to the considerable pressure on costs. By investing in research projects, governments are attempting to promote innovation, increase efficiency and maintain the growth of the local wind energy sector. This encourages the development of a varied and sustainable domestic energy landscape. Dopag is a partner in several government-funded R&D innovation projects where it is working together with wind turbine manufacturers and their suppliers to optimize the production systems and the cost-effectiveness of processes.

What does the future hold?

The importance of onshore and offshore wind farms will increase significantly in the years to come. Developers of the turbines, manufacturers of dispensing systems and research institutes are working on the production processes of the future which push the boundaries of current technologies. The manufacturers of metering and mixing machines are introducing continuous improvements to every aspect of their turnkey solutions, from the quality of the material feed with vacuumbased drum changes through to adhesive application with the variable nozzle described here. They are integrating electrically operated pallet truck connections to move the machine along the mold, together with rotating cameras that detect objects in the travel path without the need for user intervention.

The objective is to optimize the bonding process in order to reduce the mold occupation time to a minimum. This not only shortens production times, but also reduces material wastage and the overall production costs. The fact that all areas of the industry are focusing on these advances underlines the industry’s commitment to greater efficiency and sustainability in the production of future wind turbines.

Your partnership with DOPAG

  • One contact for the entire system solution
  • All applications from one provider
  • Implementation of specific requirements and automation
  • Competent support from DOPAG experts
  • A dedicated technical centre for testing and customer training
  • Close collaboration with material manufacturers
  • Decades of experience in metering and mixing technology
  • Global distribution and service in over 40 countries

Your contact

Reference projects

Applications

Choose your applications:
All DOPAG articles at a glance:
  1. Reliable bonding of high-quality packaging Reliable bonding of high-quality packaging

    Bischof+Klein uses the eldomix to bond packaging for the food industry. We were on site.

    More
  2. Stable bonding of rotor blades Stable bonding of rotor blades

    Large quantities of adhesive are required in the manufacture of rotor blades. This is achieved with specially developed metering and mixing systems.

    More
  3. Secure gluing of paintbrushes Secure gluing of paintbrushes

    For the secure bonding of paintbrushes we have customised the metering and mixing system economix.

    More
  4. Proper planning of metering and mixing systems Proper planning of metering and mixing systems

    Precision is crucial when it comes to planning. Which factors are particularly important and how can common design flaws be avoided?

    More
  5. Metering mixing and applying thermally conductive silicone material Metering mixing and applying thermally conductive silicone material

    The vectomix TC metering and mixing system from DOPAG processes thermally conductive materials precisely and cleanly. This application shows the processing of Wacker Semicosil 9672.

    More
  6. Adhesive beading in the electronics industry Adhesive beading in the electronics industry

    Higher quantities in less time - For bonding housings for LED luminaires, DOPAG has configured an automated metering system that meets precisely these requirements.

    More
  7. With automated production to the optimum PU foam gasket With automated production to the optimum PU foam gasket
    Technology, material and component - these three factors must be optimally coordinated for the automated production of PU foam gaskets. DOPAG and Stassen Industries GmbH advise customers together.
    More
  8. FIPFG series production of PU foam gaskets for control cabinets FIPFG series production of PU foam gaskets for control cabinets

    SAE Schaltanlagenbau Erfurt relies on the dynamicLine from DOPAG for the individual production of control cabinets. We have visited them on site.

    More
  9. Dispensing two different types of grease Dispensing two different types of grease

    We configured an automated lubricant dispensing system that optimises production processes in the automotive industry.

    More
  10. Dispensing systems for the production of hydrogen tanks Dispensing systems for the production of hydrogen tanks

    The eldomix dispensing system fills an impregnation bath for the production of hydrogen tanks using the filament winding process.

    More
  11. Dispensing of liquid silicone rubber (LSR) in medical technology, food industry and e-mobility Dispensing of liquid silicone rubber (LSR) in medical technology, food industry and e-mobility

    Particularly strict conditions apply to production in the medical technology and food industries. A special configuration from DOPAG enables the use of the dispensing system in the clean room.

    More
  12. How to switch from manual to machine application How to switch from manual to machine application

    When is it beneficial to switch from manual dispensing to a metering and mixing machine? - We support you to identify all relevant influencing variables.

    More
  13. High cost-effectiveness and a wide range of applications for PU foam gaskets High cost-effectiveness and a wide range of applications for PU foam gaskets

    Learn all about Form-In-Place-Foam Gasketing (FIPFG) and how it’s already begun revolutionizing engineering industries and applications around the world.

    More
  14. Gaskets and electronics potting for wallbox production Gaskets and electronics potting for wallbox production

    PU gaskets and potting compounds protect the sensitive electronics in a wallbox against dust, dirt and moisture. We offer solutions for both applications.

    More
  15. Metering and mixing technology for the production of LNG tankers Metering and mixing technology for the production of LNG tankers

    We offer dispensing systems for a reliable application of adhesives and sealants in the manufacturing of liquefied natural gas (LNG) transport tanks.

    More
  16. Contactless application of grease and oil Contactless application of grease and oil

    The contactless application of lubricants meets all conditions for complex, automated production processes and is now standard in many industries. We present the options.

    More
  17. PU gaskets for recyclable HEPA filters PU gaskets for recyclable HEPA filters

    With the dynamicLine, DOPAG provides an automated and clean application of PU foam gaskets on recyclable HEPA filters from the Swiss manufacturer Tecnofil.

    More
  18. Precise bonding for the world’s first retractable solar roof Precise bonding for the world’s first retractable solar roof

    The Swiss start-up dhp technology constructed the world’s first retractable solar roof. The individual modules are manufactured with dispensing technology from DOPAG.

    More
  19. Gasketing and bonding of control cabinets Gasketing and bonding of control cabinets

    With the dynamicLine, DOPAG offers a system for both applications and thus enables an efficient, automated series production.

    More
  20. Manual application of lubricants Manual application of lubricants

    DOPAG offers special dispensing stations for the manual application of lubricants. With the help of an adapter, components such as O-rings and other seals can be greased or oiled manually. 

    More
  21. Coating self-adhesive labels with silicone Coating self-adhesive labels with silicone

    Self-adhesive labels and stickers are produced with silicone coating via coating systems. We provide the metering system to ensure material feed.

    More
  22. Potting electronics boards Potting electronics boards

    DOPAG provided a metering and mixing system for potting electronics boards for e-bike battery packs. 

    More
  23. Serial production of PU foam gaskets in the automotive industry Serial production of PU foam gaskets in the automotive industry

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  24. Bonding and sealing in aircraft production Bonding and sealing in aircraft production

    The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.

    More
  25. Automated bonding of filters Automated bonding of filters

    For the production of plastic filter elements, DOPAG configured and automated metering and mixing system.

    More
  26. Automated application of sealants Automated application of sealants

    DOPAG provides an individual solution for the application of one-component sealant in the production of cardan shafts for special vehicles.

    More
  27. Series production of PU foam gaskets Series production of PU foam gaskets

    With the dynamicLine, DOPAG offers an efficient solution for series production of PU foam gaskets in all industries.

    More
  28. Metering and mixing system for adhesive bonding of automotive components Metering and mixing system for adhesive bonding of automotive components

    DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.

    More
  29. Valves for grease spraying in furniture production Valves for grease spraying in furniture production

    DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.

    More
  30. Efficient handling of components during dispensing sealing foam Efficient handling of components during dispensing sealing foam

    For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.

    More
  31. Honeycomb potting of sandwich panels Honeycomb potting of sandwich panels

    With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircraft, could be filled homogeneously.

    More
  32. Sealant dispensing for truck manufacturer Sealant dispensing for truck manufacturer

    DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.

    More
  33. Valves for the contactless spray application of grease and oil Valves for the contactless spray application of grease and oil
    Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
    More
  34. Precise potting of filters and filter elements Precise potting of filters and filter elements

    Precise potting of filters and filter elements is necessary for high safety and purity. DOPAG supported a global manufacturer with individually configured metering and mixing systems.

    More
  35. Profitable production of components for control cabinets and enclosures Profitable production of components for control cabinets and enclosures
    With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
    More
  36. Metering systems for optimal lubricant dispensing Metering systems for optimal lubricant dispensing

    The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!

    More
  37. Continuous dosing of lubricants, adhesives and sealants Continuous dosing of lubricants, adhesives and sealants

    The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.

    More
  38. Dispensing thermal gap fillers Dispensing thermal gap fillers

    Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.

    More
  39. Automated application of PU gaskets on components Automated application of PU gaskets on components

    Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.

    More
  40. Shot valve for contactless greasing Shot valve for contactless greasing

    DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.

    More
  41. Perfect FIPFG applications Perfect FIPFG applications

    The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.

    More
  42. Individual grease dispensing Individual grease dispensing

    DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.

    More
  43. Dosing systems for liquid 3D printing Dosing systems for liquid 3D printing

    The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.

    More
  44. Automated systems for electronic potting Automated systems for electronic potting

    DOPAG provides automated potting solutions for variuos applications - two practical examples!

    More
  45. Turnkey systems for automated metering and mixing Turnkey systems for automated metering and mixing

    CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.

    More
  46. Automated grease metering Automated grease metering

    DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.

    More
  47. Dosing technology in rotor blade production Dosing technology in rotor blade production

    Metering and mixing systems are necessary in various applications in rotor blade production. DOPAG presents its solutions. 

    More
  48. Individual systems for automated glue dispensing Individual systems for automated glue dispensing

    The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.

    More
  49. Automated production of foam gaskets Automated production of foam gaskets

    With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.

    More
  50. Accurate dosing of grease and oil Accurate dosing of grease and oil

    DOPAG developed a special dosing system for the automated lubrication of gas springs.

    More
  51. Lubrication in the automotive industry Lubrication in the automotive industry

    Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.

    More
Show more